CANBUSview XL III, CAN Quick Tester C‐QT15 and DeviceNet Analyzer

CANBUSview XL III, CAN Quick Tester C‐QT15 and DeviceNet Analyzer

CANBUSview XL III, CAN Quick Tester C‐QT15DeviceNet Analyzer (BC-200-CAN/DN)

What is good is gladly taken. Several companies worldwide have added our diagnostic tools to their product portfolio.
While companies likeIxxat...ProkormentandPhytoolssell the CAN bus tester 2 and the CANtouch as such,
Other companies like to decorate themselves with foreign feathers.

How to get our CAN bus tester 2 from the companyIndu-SolasCANBUSview XL IIIIt sells a fact,
The customers with us afterCAN bus tester 3Let ask. CANBUSview XL III and CAN bus tester 2 are identical except for the front film,
Because only the name Indu-Sol exchanges the name for its own trade name. Manual and software remain those of CAN bus Tester 2.

The companyBalluffCAN bus tester 2 is sold in a special version asDeviceNet Analyzer. .
Unfortunately, no effort has been put into maintaining the product for years, so that no software updates have been available since 2011.
The device is limited to the DeviceNet bus system and incompatible with the software of CAN bus Tester 2, which controls all bus systems
(including DeviceNet) can analyze.

Also asSofting BC-200-CAN/DNCAN bus tester 2 was distributed.
This tester was also designed for DeviceNet and thus primarily for the American market.
Softing also sold the CAN bus Tester 2 as such without branding in different versions depending on licensing equipment.

The companyI‐v-gGöhringer offers the CAN alarm asCAN Quick Tester C‐QT15with its own front film.

CAN-Bus-Tester-2 case
CAN bus tester-2-flat-complete


    • Related Articles

    • CANtouch vs. CAN bus tester 2, the decision.

      CANtouch vs. CAN bus tester 2, the decision. >> This article is obsolete with the release of the CAN bus tester GT3. Our new measuring device combines the properties of CANtouch and CAN bus Tester 2 and offers much more extensive analytical ...

    • Exchange service for fieldbus diagnostic equipment, end of service and calibrations

      Exchange service fieldbus diagnostics Actually, there are very few repairs to our equipment. Most influence. This is what our conscientious developers. In contrast to some other manufacturers, GEMAC attaches great importance to protecting the devices ...

    • Detection of short circuits in CAN bus error images

      Detection of short circuits in CAN bus error images The robustness of the CAN bus is also based on its tolerance to short circuits occurring. Below we summarize the possibilities and show how the CANtouch detects these errors. CAN-Bus short-circuit ...

    • CAN-wiring

      CAN-wiring The sequence of the wiring test raises questions from time to time. We would like to explain why the process is as it is. There are also a few tips. For the measurement, the CAN bus tester 2 must be operated at 24V. The process in CANtouch ...